Final product image
What You’ll Be Creating

For a long time we’ve used wall shelves to hold our books, cups, and lamps, or just to decorate our home with plants and portraits. They are very useful and always help us to save space in any place, and because of this I was inspired to create this tutorial, where we’ll draw these two wall shelves.

In this tutorial you will learn how to create these shelves using simple shapes and applying basic techniques to create each of the elements that are on them. I hope you enjoy the process and learn something new.

If you’re looking for inspiration, GraphicRiver has plenty of flat design vectors for you to browse.

1. How to Create a Wall Shelf

Step 1

Let’s start by creating a new document (File > New) with a Width of 800 px and a Height of 600 px. The first thing would be to create the
shelf where all the objects will be placed.

For the shelf, create a 280 x 16 px rectangle with the Rectangle
Tool (M)
and select #8199A3 as the fill color. For the shelf’s support, create a bolt using a
14 x 30 px rectangle and then a 4 x 4 px ellipse (#8FAAB5) with the Ellipse Tool (L)

Creating the table rectangles

Step 2

Add shadows to the shelf’s support using a
14 x 8 px rectangle (#6B7F87), duplicate the bolt
(Control-C > Control-F), and change its fill color to #6B7F87. After that, send it backwards (Right click > Arrange >
Send Backward
) and move the ellipse down twice using the arrow keys on your
keyboard.

Group all the elements making up the support (Control-G) and duplicate it (Control-C > Control-F). Secure it to
the other side of the shelf as shown in the image below.

Now adding the supports

Step 3

Group all of the shelf together (Control-G) and
duplicate it (Control-C > Control-F). Place the second shelf by
double-clicking the Selection Tool (V) and setting a distance of 140 px above
the other shelf in the dialog window.

Add a distance of 140 px between the shelves

2. How to Create the Books

Now that we have created the shelves, we will draw each of the elements that will be on them. Let’s begin by drawing the first set of books.

Step 1

For the first book, create a 15 x 62 px
rectangle (#A094D9). Then add two 15 x 4 px
rectangles (#897FBA) and a 7 x 7 px ellipse (#897FBA).

Afterwards, add a 7 x 62 px rectangle (#A094D9) above the book and set
the Blending Mode to Multiply with a 20% Opacity using the Appearance
panel. Group everything together
(Control-G).

A new book with rectangles and ellipse

Step 2

For the second book, create one 12 x 55 px rectangle
(#3498DB) and three 12 x 3 px
rectangles (#EDEEF0), and then separate them
vertically every 3 px.

Afterwards, add a 6 x 55 px rectangle (#3498DB) and set the Blending
Mode
to Multiply with a 20% Opacity using the Appearance panel. Group the entire book together (Control-G)
and place it next to the other book.

Second book with three lines

Step 3

For the third book, create a 6 x 50 px rectangle
(#F6CD61) and add a 3 x 30 px
rectangle (#EDEEF0) in its center. Afterwards, create a 3 x 50 px rectangle (#F6CD61) and set the Blending
Mode
to Multiply with a 20% Opacity. Group the book together (Control-G).

Double-click the Rotation Tool (R) and enter
an angle of 350 degrees in the dialog window. With the help of the guide lines, place the book next to the others.

Step 4

Now let’s create the second set of books.

First, create a 58 x 15 px rectangle (#67537A) and then select the
right-side nodes and round the corners with Live Corners using the Direct
Selection Tool (A)
.

Duplicate the rectangle (Control-C > Control-F)
and change its fill color to #EDEEF0. Go to Effect > Path > Offset Path and set an offset of -3
px
. Then, expand its appearance (Object > Expand Appearance).

Now select the left-side nodes and align them
next to another rectangle.

Now create a new book of the second group

Step 5 

Copy the last rectangle (Control-C) for a
moment. Then select both rectangles and apply Minus Front located in the
Pathfinder panel. 

Paste again the rectangle (Control-F), select
the left-side nodes and move them 2 px to the right. Now create a 60 x 2 px
rectangle (#C2C3C9) to add a shadow on the book’s spine, removing the rest using the
Shape Builder Tool (Shift-M)

Moving the left-side nodes and add a shadow

Step 6

Add a bookmark by creating a 6 x 8 px rectangle
(#39B4FF). Take the Pen Tool (P)
and add a node in the middle of the bottom, and then move it upwards slightly.

Now group the book together (Control-G).

Adding a bookmark con Pen Tool

Step 7

For the second book, we’ll be using the same
procedure from steps 4–6, so use a 49 x 12 px rectangle (#1DABB8) and
round its left-side corners.

Duplicate the rectangle (#EDEEF0) (Control-C
> Control-F
) and apply an offset of -3 px. Continue with steps 5-6 explained
above.

The second book with a rectangle and round the right-side corners

Step 8

It’s time to create the third set of books. Begin by creating a 70 x 23 px rectangle (#39B4FF) and then add two 4 x 23 px rectangles (#EDEEF0) and
one 8 x 12 px rectangle (#EDEEF0).

Afterwards, create a 70 x 12 px rectangle (#39B4FF) and set the Blending
Mode
to Multiply with an Opacity of 20% using the Appearance panel. 

Creating the third set of books

Step 9

We’ll create a second book the same way we did
in step 7. Use a 61 x 15 px rectangle (#C2B6D6). 

Creating the second book the same way in step 7

Step 10

Now to create the last set of books.

For the first book, start with a 70 x 10 px
rectangle (#67537A). Then add two 2 x 10 px
rectangles (#EDEEF0) and one 30 x 2 px
rectangle (#EDEEF0).

Finish the set by creating a 70 x 5 px rectangle
(#67537A) and set the Blending
Mode
to Multiply with a 20% Opacity. Group the book (Control-G).

Another book with rectangles

Step 11

For the second and third books in this set, use
a 70 x 10 px rectangle (#4CD4B0) and add four 3 x 10 px rectangles (#EDEEF0).
Afterwards, create a 70 x 5 px rectangle (#4CD4B0) and set the Blending
Mode
to Multiply with a 20% Opacity. Group the book (Control-G).

Duplicate the last book (Control-C >
Control-F
) and double-click it to enter Isolate Mode. Change the fill color #F6CD61 and the shadow’s fill color by using the Eyedropper Tool (I) and pressing Shift on the color of the other rectangle. Press Escape to exit
Isolate Mode.

Duplicating the book twice

3. How to Create the Portraits

Step 1

In this step we are going to create portraits
for our shelves. Start by creating one 51 x 72 px rectangle (#6F5E87) and one 40 x 60 px
rectangle (#F7F7F8).

Then duplicate the last rectangle (#D8D9DD)
twice (Control-C > Control-F), and move the last copy down twice and once to the right using your keyboard’s arrows. Select it along with the last
copy and apply Minus Front from the Pathfinder panel.

Creating a new portrait for our shelves

Step 2

Create a new 30 x 48 px rectangle (#6F5E87), and then add two 40 x 40 px rectangles (#BADEB2) and rotate them 45 degrees using the Rotate Tool (R). Use the
Shape Builder Tool (Shift-M) to remove the remaining part.

Add a sun by creating a 14 x 14 px ellipse (#F7E999). Group all the elements of the
portrait (Control-G).

Now adding a mountains and a sun

Step 3

For the second portrait, use a 45 x 63 px
rectangle (#299EBF), and add an inner frame using a 33 x 50 px rectangle (#8BCBDE).
Then duplicate the inner frame (#7FBACB) twice (Control-C > Control-F), move the last copy twice down and once to the right, and apply Minus Front on the Pathfinder panel—make sure both copies are selected when applying Minus
Front

Set the Opacity to 50% in the Appearance
panel.

New portrait using Rectangle Tool

Step 4

Add two 70 x 70 px rectangles, selecting #D8E2EC and #87E8C6 as the fill colors. Rotate them 45 degrees using the Rotate Tool (R).
Then select the Shape Builder Tool (Shift-M) and subtract towards the inner
frame, leaving the inner forms.

Group the portrait (Control-G).

Adding a mosaic with rectangles

Step 5

For the last portrait, use a 42 x 55 px rectangle
(#67537A) and set the inner frame to 34 x 46 px (#FFFFFF).
Follow the same steps as mentioned in step 2 to apply the inner shadow.

Add a 26 x 38 px rectangle ( #EDEEF0). Then add a 14 x 14 px ellipse (#F7A3A2) and
a three-pointed polygon and a radius of 8 px (#82BBC2) using the Polygon Tool.

Another portrait with a ellipse and triangle

4. How to Create the Plants

Step 1

Now let’s draw the plants that will liven up
the shelves. Use a 32 x 26 px rectangle (#BCCBFA) for the base of the pot, and then move the lower nodes 4 px inward
using the Direct Selection Tool (A)

Duplicate the pot (Control-C > Control-F)
twice and move the last copy to the left. Apply Minus Front using the
Pathfinder panel and change the fill color to #A4BEE7.

Creating a pot for the first plant

Step 2

Add a new 34 x 3 px rectangle (#6B7EB9). Duplicate it (Control-C > Control-F) and
change its width to 13 px using the Transform panel, and then change its fill color
to #556AA3.

Add a 4 x 24 px rectangle (#1ABC9C). Then create a 8 x 8 px rectangle (#089E80) and
round the lower left and upper right corners with a radius of 8 px from the
Transform panel. Group it (Control-G) and position it as shown in the
image below.

Adding the plant in the pot

Step 3

Let’s draw the plant’s leaves. Use a 15 x 24 px
rectangle (#BADEB2) and set the radius of all corners to 15 px using the
Transform panel. Duplicate this first leaf (Control-C > Control-F) (#ACD4A3) and
flip it vertically (right click > Transform > Reflect).

Add two 30 x 30 px ellipses (#A2CC99) and
cross them at the center, applying Intersect from the Pathfinder panel. Place this
last petal behind the rest (click right > Arrange > Send Backward). Group the plant together (Control-G).

Drawing the plants leaves

Step 4

For our second plant, let’s begin by using the
same procedure from steps 1-2. Use a 32 x 43 px rectangle for the pot (#BCCBFA) and 36 x 2 px (#6B7EB9) and 18 x 2 px rectangles (#556AA3) for the top.

New pot for the second plant

Step 5

Now we’re going to draw the leaves of the next
plant. Select the Pen Tool (P) and draw a petal as shown in the image below.
Rotate the petals using the Rotate Tool (R) and alternate the following fill
colors between them:

  • #BADEB2
  • #ACD4A3
  • #A2CC99

Remember to duplicate the petals using Control-C followed by Control-F.

Drawing the plants with Pen Tool

5. How to Create the Radio

Step 1

Now let’s create the radio using a 37 x 80 px
rectangle (#08AAC7) to represent the body, and add a 76 x 32 px rectangle (#BFE6EC). 

Duplicate (Control-C > Control-F) the last
rectangle (#A3D1D9) twice and
move the last copy twice downwards and once to the right. Then apply
Minus Front on the Pathfinder panel, making sure to select the last
copies.

Add two 6 x 3 px rectangles (#007099) for
the base of the radio.

Creating the radio with rectangles

Step 2

Now add the speakers using a 22 x 22 px ellipse
(#A3D1D9), duplicate it (#08AAC7) (Control-C > Control-F) and move it upwards by 1 px

Then add a 14 x 14 px (#EDEEF0) and a 7 x 7 px rectangle
(#08AAC7). Group all ellipses together, duplicate the
group (Control-C > Control-F), and place both of them as shown in the image below.

Add another 6 x 6 px ellipse (#A3D1D9) and
duplicate it (#007099), moving it upwards by 1 px. Repeat the same procedure but
change the fill color of the last ellipse to #08AAC7. Group the radio (Control-G).

Adding the speakers with ellipses

6. How to Create the Pencil Pot

Step 1

Let’s continue with the pencil pot. Begin by
drawing a pencil using a 3 x 35 px rectangle (#EBBD63) and then add four 3 x 2 px rectangles with the following fill
colors: #CB6120#D8D9DD#AEADB3

Create a 1.5 x 35 px rectangle (#EBBD63) and set the Blending
Mode
to Multiply with a 20% Opacity. Add
a node using the Pen Tool (P) at the bottom of the pencil and move it downwards.
Group everything together (Control-G).

Creating a pencil

Draw another pencil using an equal 3 x 35 px rectangle (#87E8C6). Duplicate it and change its Width to 1.5 px using
the Transform panel. Set the Blending Mode to Multiply and the Opacity to 20%
using the Appearance panel. Group the pencil together (Control-G).

Another pencil with rectangles

Step 2

Now draw the glass by creating a 22 x 30 px
rectangle (#897FBA), and add a 22 x 3 px
rectangle (#7D73B0). Create another 25 x 3 px rectangle (#A094D9) for
the top of the glass. Group the glass (Control-G) and position the
pencils under the glass as shown in the image below.

Creating the glass for the pencils

7. How to Create the Box

Step 1

Let’s create the box using a 63 x 31 px
rectangle (#A094D9). Add a 63 x 3 px
rectangle ( #897FBA). Now create two
rectangles for the label, one of 28 x 10 px (#EDEEF0) and another one of 22 x 2
px
(#F6CD61).

Finally, create the box lid using a 69 x 13 px
rectangle (#6F5E87). Group everything
together (Control-G).

Creating a box

8. Place All the Elements Together

Step 1

Combine all the items on the shelves.

Combining the items on the shelves

Step 2

Finish the design by adding an 800 x 600 px
rectangle (#EFF7E0) to the back of the canvas. And with that, we have finished this
illustration.

A new background with a rectangle

Congratulations! You’re Finished!

Done! We finished this amazing illustration, and it turned out great. We have created a bit of everything, which is a good
thing because surely you have learned many new things that can help you open up
your imagination. 

I hope you enjoyed it as much as I did, and
that every step has been a learning experience for you. I’ll be awaiting your
results!

Final result

Go to original Source
Author: Hector Heredia

Powered by WPeMatico