If you’re into retro flower illustrations, this tutorial will definitely
catch your attention.
Today we’ll create a vintage frame by using basic
shapes, the Warp Tool, and a Scatter Brush. You will learn how to create pansies and the laced doily. In the end, you’ll get a
very romantic illustration!
1. How to Create the Pansy Flower
After creating a New Document 850 x 850 px Width and Height, we will start by drawing the petals for our pansy.
First, we’ll draw an ellipse and then stretch it out as if you were stretching out a piece of pizza dough. Use
the Ellipse Tool (L) to make an ellipse. On the Tools panel (Window
> Tools), double-click on the Warp Tool (Shift-R).
In the new
dialogue window, enter the options presented below. The Width and Height
on the Global Brush Dimensions can be different from the ones I used. It
depends on the petal size for the one you’re making. Then, click OK.
you’ve entered the necessary options, grab the Warp Tool (Shift-R) and
pull the mouse in different directions, as shown by the arrows in the
Add another darker ellipse on top of the shape you’ve created. Change the
options for the Warp Tool: double-click on the Warp Tool (Shift-R and
Enter), and in the section for Global Brush Dimension, decrease the Width
and Height values. Then, hit OK. Now, by using the Warp Tool (Shift-R),
stretch this darker ellipse to create the shadow on the petal.
Let’s continue. Create a violet ellipse and stretch it out again with
the Warp Tool (Shift-R). Don’t worry—it may look weird now, but once we
put everything together, it’ll be cute. Just you wait!
Select all details of the petal and group them together
(right-click > Group). Make two more copies of the petal (Control-C,
Control-V) and arrange them as shown below.
To create the fourth petal, make a copy of the first one, and then slightly
expand its size and rotate it to the right. Change the colors of this
petal as shown in the image below.
The fifth petal peeps shyly from behind, so we’ll place it behind and slightly tilted to the left. This one will have the darkest color.
In the middle of the flower, create two yellow circles (Ellipse Tool
(L)) and stretch them with the Warp Tool (Shift-R) to make the pistil
and stamens for our pansy. Keep up the good work!
2. How to Create the Leaf
This process will be very similar to the way we created the petals.
We’ll start with the Ellipse Tool (L) and draw two ellipses, and then
stretch out both ellipses in different directions by using the Warp Tool
When transforming the smaller, darker ellipse, change the
Width and Height in the Warp Tool options (double-click on the Warp Tool and
set the necessary values). Using the changed Warp Options (Shift-R),
warp the smaller ellipse to create a leaf-like shape.
In this step, we will add the veins of the leaf.
Using the Pencil Tool (N), draw a bunch of veins throughout the leaf.
Remember to remove the fill color and choose a dark green stroke color.
Before drawing, be sure to check the Round Cap button on the Stroke
When you are done with the lines, expand them. Select
one vein and press Select > Same > Fill color. This will select
all the lines you just outlined. Now go to Object > Expand and hit
Keeping all veins selected, unite them by pressing the Unite button
on the Pathfinder panel (Window > Pathfinder). Still keeping them
selected, make a small touch with the Warp Tool (Shift-R). The veins
will now look more realistic.
Make another copy of this leaf. You can make a mirror reflection of the
existing one. While keeping the leaf selected, right-click your mouse
and select Transform > Reflect.
Once you get a dialogue box, select
Axis Vertical, Angle 90 degrees, and press Copy. Make this copy slightly
smaller. If you want more changes, you can stretch the new one with the
Warp Tool (Shift-R) (optional).
3. How to Create the Background
Let’s make a light cream square for our background. Using the Rectangle
Tool (M), click on the artboard and create a square 850 x 850 px with no
stroke and the fill color presented below.
Draw a circle with the Ellipse Tool (L) while holding the Shift button.
Place this circle in the middle of the square. To do this, open the Align
panel (Window > Align). Set the alignment to Artboard (open the
fly-out menu and go to Show Options if you don’t see the Align To
section shown here), make sure that your shapes are selected, and click
the Horizontal Align Center and Vertical Align Center buttons. In the
end, your circle should be in the middle of the square.
Using the same method, align the square.
In this step, we’ll create a Scatter brush that we can use to make our
doily. Delete the fill color and set the stroke color of your choice.
the Ellipse Tool (L), hold down the Shift key to make one circle with
relatively large stroke weight and no fill. On top of this circle, add a
smaller one with a thinner stroke weight.
To make a copy of the
smaller circle, select it, and then while holding the Shift and Alt keys,
drag it down. Select these two small circles and group them:
right-click > Group.
While keeping them selected, press the Rotate
Tool (R) and the Enter key. In the pop-up window, enter 45 degrees and hit Copy. Press
Control-D and you’ll get a copy of these circles rotated in 45-degree increments.
Continue pressing Control-D until you get the whole flower
made from small circles and one large circle in the middle. Expand this
image: select all circles and go to Object > Expand.
After expanding the image, the stroke color will automatically change to
the fill color. Change this fill color to white and drag the entire set
of circles to the Brushes panel. Select the Scatter Brush and enter the options for Scatter Brush presented below.
Now we will use this brush to design our doily. Select the white circle
in the middle of the artboard which you created before, and hit the
newly created brush. Tadaa—you just made a doily! You can also change
the stroke Weight on the Stroke panel if you’d like to adjust the size
of the side lace ornaments.
4. Place All the Elements Together
Now return to your pansy. Make two more copies of it and arrange them together; feel free to change the size.
Let’s not forget our leaves! Make as many copies of the leaves as you want
and place them behind the flowers, but over the background. Congratulations!
Awesome Work, You’re Done!
A round of applause for a job well done! I hope you enjoyed learning
some of the processes and shortcuts during the creation of this image in
the Adobe Illustrator. As always, feel free to share your project and
ask questions in the comments section below. Happy designing!
Go to original Source
Author: Nataliya Dolotko
Powered by WPeMatico