What You’ll Be Creating
Do you feel the crisp winter air? Yes—winter is approaching! During
this time of the year, many birds migrate in search of warmer
temperatures—except the sparrows, our little friends which are always
Let’s draw one of these cute creatures! We will use basic shapes, move a few anchor points, and use the warp effect. You will find
many similar elements from my previous tutorials, which will make
this tutorial easy and still fun to create!
Alternatively, you can always look on GraphicRiver at the many animal vectors available.
1. Draw the Body Shape
Create a new document (Control-N) and hit the Ellipse Tool (L). We will
first create the body of the sparrow. Set the stroke color to any color, with no fill. Create an ellipse. Then add a smaller ellipse on the
Take the Rectangle Tool (M) and draw a rectangle; this will form
the neck of the bird. To finish off the body shape, take the Direct
Selection Tool (A) and make the lower part of the rectangle wider.
Your resulting shape should look like the following image.
Select the shapes we just created for the body of the bird. Go to the
Pathfinder panel (Window > Pathfinder) and click on the Unite button.
Take the Convert Anchor Point Tool (Shift-C) and convert sharp corners
into smooth. Notice that you are not clicking with the Convert
Anchor Point Tool (Shift-C), but stretching the handles of the
Delete all the strokes and fill the resulting shape with the color shown in the image below.
2. Create the Beak
Let’s move on to the beak. Draw a yellow ellipse. Now, we want to get a
sharp corner with the help of the Convert Anchor Point Tool (Shift-C).
Click on the right anchor point. Then take the Direct Selection Tool (A)
and select the top and bottom anchor points. Shift them to the left. We
now have the beak shape done!
Let’s draw a narrow ellipse. Make the right anchor point sharp and go to
Effect > Warp > Arc. Enter the following settings.
Don’t forget to expand the resulting shape (Object > Expand
Appearance). Place this shape on the beak that we created in the
previous steps. This adds the shadow to show the upper and lower parts of
Let’s put the beak on the sparrow.
3. Create the Eye
We will need to create just one eye because we can only see one side of the bird. Let’s create two ellipses for the eye.
He can see now!
4. Create the Pattern of the Sparrow
As you can see, our bird is not a real sparrow just yet. We will add a
special pattern that will distinguish this little bird as a sparrow.
After creating a new gray ellipse, place it as shown in the image below.
Select the body shape of the bird and make another copy in front
(Control-C, Control-F). Keep it selected and, while holding down the
Shift key, select the new overlapping gray oval. In Pathfinder, press the
Draw two more ellipses and place them as shown below. The smaller
ellipse is not overlapping the body—don’t do anything with it. Select
the body shape again and make another copy in front (Control-C,
Control-F). Keep it selected and, while holding down the Shift key,
select the new overlapping oval. In Pathfinder, press the Intersect
5. Create the Wing
Make the left anchor point of the newly created ellipse sharp by using
the Convert Anchor Point Tool (Shift-C). Then move the top and bottom
anchor points to the right. We just created the shape of the wing.
Create three more ovals. These will represent the feather.
Group those three ellipses you just made—it will help you to maneuver
easily. Holding down the Shift and Alt keys together, slightly move up
the grouped shape. So you’ve just created a copy of the ellipses.
Control-D few more times to repeat your last movement, until you have five sets. Then select the whole column of ellipses, hold down the Shift and Alt keys, and move it to the right. Keep pressing Control-D until you have six columns overlapping each other.
Go to Effect > Warp > Bulge and in the new window, adjust the options you can see below. Don’t forget to expand it: Object > Expand Appearance.
Place the warped ovals for the feathery effect on our wing shape.
Rotate it a bit and place it on the sparrow.
6. Create the Tail of the Sparrow
Using the Ellipse Tool (L), draw two long, narrow ellipses to create the tail. Place them as shown in the image below.
Add two more ellipses.
7. Create an Acorn
To create an acorn, start with three ellipses.
Draw a brown oval behind everything you just made
in the previous step. Keeping the brown ellipse selected, make a copy
in the front (Control-C, Control-F). Make this copy smaller and darker.
Using the Pencil Tool (N), draw a stem on the acorn. Before drawing the
stem, delete the fill color and set the stroke color (the same as the fill color of the first brown ellipse from the previous step).
After you’ve drawn
the stem, on the Stroke panel, make the stroke very thick and check
Round Cap. Expand this (Object > Expand, OK). Place the stem on the
top of the acorn.
Create two more acorns by copy-pasting and arrange them nicely together.
8. Create the Oak Leaf
First, we are going to create the stalk, the main vein on our oak leaf.
Take the Polygon Tool and click on your art board. Make it 3 Sides with
any Radius. You will get a triangle—make this very narrow and long.
Using the copy of the stalk, create more veins of the oak leaf. Draw an
oval on the top of the leaf and add three more on the left side of the
Select the three leaves from the left side (not from the top),
right-click the mouse and select Transform > Reflect. This will bring
up the Reflect dialogue window, where you should enter Axis Vertical,
Angle 90 degrees, and press Copy. Move the three new leaves to the
right. Draw one more oval on the bottom.
Let’s align the leaf. For this, select three ovals from the left side of
the leaf and three ovals from the right side; group them together
(right-click > Group). Select three veins from the left and the right
side; group them together. Select the whole leaf and on the Align panel
(Window > Align) press the Horizontal Align Center button. Look how
perfect our leaf looks now!
Select the blade (all the ovals without
veins and stalk) of the oak leaf, and on the Pathfinder panel press
the Unite button. Make the bottom of the leaf sharp using the Convert
Anchor Point Tool (Shift-C). Group the leaf.
Create two more copies of the oak leaf with different fill colors.
Create a nice composition from the acorns and leaves.
9. Combine All the Elements Together and Create the Background
Combine everything together.
Let’s create the background to hold our elements together. Place a light cream circle behind.
In this step, you can nicely arrange the acorns and leaves behind the background circle.
To finish the background, draw a square with width and height of 600 px.
Apply a radial gradient from very light yellow to light yellow colors.
Place this square background behind (Control-X, Control-B) everything you made before. That’s it!
Our sparrow is ready! Isn’t it adorable? Many thanks for your patience
as you went through the whole process and achieved the great result. Our
sparrow will enjoy the autumn as much as you do.