What You’ll Be Creating
In this tutorial I will
show you, step by step, how to create a circular grid, align it perfectly and
design a cute owl character. Hopefully, you’ll learn how to use circles to
create other characters on your own.
1. Create Circles
Go to View > Show Grid.
Using the Ellipse Tool
(L), create a 165 x 165 px circle. This will be the head. Then, create another
147 x 147 px circle for the body. Select both circles, click twice on the first
one to make it active and, using the Align panel, click on Horizontal align
center and Vertical align center.
For an eye, create a 45
x 45 px circle. This time, align it with Vertical distribute center, placing
it to the left like this:
a 173 x 173 px circle and a 147 x 147 px circle and align them as before. Hit Control-R to bring up the ruler. Then click on the ruler and use the mouse to place it in the center. Position both circles as shown
in the picture.
overlap between the two large circles gives your owl a beak.
Create three circles
(red): 293 x 293 px, 208 x 208 px and 173 x 173 px. Position them as
shown in the picture below. All the circles must be centered.
the final three circles (purple): 237 x 237 px, 293 x 293 px and 117 x 117 px.
Place them as shown in the picture below. The small circles are shown for
select all circles, except for the first two we created. Press Control-G to
group them. Right click on the mouse, and choose Transform, then Reflect.
Select Vertically and click on Copy.
Use the red circles and guide to align the group in the middle.
Select everything, Control-C, lock the layer and create a new one. Shift-Control-V to copy circles in place.
With everything selected, delete the stroke and fill with any color. Using the Pathfinder panel, click on Divide.
Delete the shapes you
no longer need. Now you can add strokes so you can see it better.
Using the Direct
Selection Tool (A), select shapes and color them one by one.
- Blue shades:
- Orange shades:
- Brown shades:
For the eyes, create a 35 x 35 px (
#848484) and a 28 x 28 px (
For the reflection,
create two 10 x 10 px circles (I used the same light blue color as for the
owl). Overlap them and, using the Pathfinder panel, click on Minus Front.
Create a 3 x 3 px
circle and place it at the bottom of the pupil. Group the eye and duplicate it
by holding down the Alt key and dragging the mouse.
3. Cleaning Up
Using the Direct
Selection Tool (A), select everything in one color and click Unite in the Pathfinder panel.
Repeat for all colors.
This technique is all
about accuracy and detail. The more accurately you align the circles, the less
work you’ll have to do in the end. I hope you enjoyed this tutorial and will be
able to create something different on your own!